Key Takeaway
CPSC, Homier Distributing Co. Announce Recall of Extension Cords, Portable Lights, and Fluorescent Work Lights by Homier Distributing Co. Inc., of Huntington, Ind. was recalled on June 19, 2003. What to do: Consumers should stop using the product immediately and mail the cord to Homier Distributing Co., Customer Service Center, 100 Commerce Drive, Hunting...
CPSC, Homier Distributing Co. Announce Recall of Extension Cords, Portable Lights, and Fluorescent Work Lights
Description
Products Hazard Description HDC Brand 50-ft. Outdoor Extension Cord (Catalog #04247)HDC Brand 100-ft. Outdoor Extension Cord (Catalog #04521), Undersized wiring, are not properly polarized, and do not have overcurrent protection, which causes overheating, posing a shock and fire hazard to consumers. The cords are orange and have a three-prong plug. There is no labeling on the cord but the packaging reads, "HDC HOMIER DISTRIBUTING … 04247 50 FT. HEAVY DUTY EXTENSION CORD WITH 3-WIRE GROUNDED…MANUFACTURED IN CHINA."The cords also are orange and have a three-prong plug. The characters "65 C 16AWGX3C" are printed on the cord. The packaging reads, "HDC HOMIER DISTRIBUTING…04521 100 FT. OUTDOOR EXTENSION CORD…MANUFACTURED IN CHINA" HDC Brand Handyman's Trouble Lights (Catalog #04299)HDC Brand Trouble Light with 25' Cord (Catalog #04109) Undersized wiring, are not properly polarized, have inadequate grounding, faulty electrical conections, and plastic handles that once ignited continue to burn and spread flames, posing a shock, electrocution and fire hazard to consumers. The lights have a silver metal shroud, an orange plastic handle with a three-prong receptacle for an extension cord, and a 12-ft. orange cord. The metal shroud has the following labeling stamped into it, "CAUTION AVOID HAZARD - PULL PLUG WHEN RELAMPING - USE ONLY 75 WATT OR SMALLER BULB."The lights have a silver metal shroud, an orange plastic handle with a three-prong receptacle for an extension cord, and a 25-ft. orange cord with a three-prong plug. The metal shroud has the same words stamped into it as the 12-ft. model. The cords were manufactured in China. HDC Brand 16-inch AC/DC Fluorescent Work Light (Catalog #04070) Lack proper grounding, have exposed live wires, faulty electrical connections, and have sharp metal edges that can damage the insulation of electrical wires, posing a shock or electrocution hazard to consumers. The work lights have a 16-inch fluorescent light bulb with a silver metal shield on one side and can be plugged into a household outlet or the cigarette lighter in a car. The metal shield is labeled in part, "3 PINS PLUG TO AC, 110V-120V CIGARETTE PLUG TO DC, 12V.MADE IN CHINA. WARNING: To Prevent Fire or Shock Do Not Expose This Appliance to Rain or Moisture. The entire light is about 20 inches long and the bulb and shield are encased in a plastic tube with yellow end caps.
Injuries / Consequence
The company has received one report of an individual who sustained an electric shock and burn injury using the fluorescent work light near his car.
Remedy
Consumers should stop using the product immediately and mail the cord to Homier Distributing Co., Customer Service Center, 100 Commerce Drive, Huntington, IN 46750 for a full refund, including the cost of shipping.
Products Affected
HDC Extension Cords, Portable Lights, and Fluorescent Work Lights
Lights & AccessoriesImages
Company Information
Homier Distributing Co. Inc., of Huntington, Ind.
Unknown location
View all 1 recalls by Homier Distributing Co. Inc., of Huntington, Ind. →Related Recalls
Crownplace Brands Recalls Kerosene Lamp Burners Due to Burn and Fire Hazards
August 23, 2016
Varaluz Recalls Longfellow Light Fixtures Due to Fire Hazard
January 28, 2016
Seasonal Specialties Recalls Synchronized Music and Lighting System Due to Fire Hazard; Sold at Menards
January 19, 2016
Westinghouse Lighting Recalls Glass Shade Holders Due to Risk of Electrical Shock; Sold at Home Depot Stores
March 12, 2015
Philips Lighting Recalls Lightolier Glass Lenses Due to Laceration Hazard
July 29, 2014
Ceiling-Mounted Light Fixtures Recalled by Dolan Designs Due to Fire and Shock Hazards
September 12, 2013
Frequently Asked Questions
Is this recall still active?
Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.
How do I check if my product is affected?
Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.
What remedy is available for this recall?
The listed remedy for this recall is: Consumers should stop using the product immediately and mail the cord to Homier Distributing Co., Customer Service Center, 100 Commerce Drive, Huntington, IN 46750 for a full refund, including the cos...
Where can I find the original recall notice?
This recall was issued by CPSC. You can view the original notice using the link provided above.