Key Takeaway

CPSC, Invensys Building Systems Announce Recall of Siebe Actuators in Building Fire/Smoke Dampers was recalled on October 2, 2002. What to do: To be eligible for a free actuator replacement, the building owner must test the actuator and report the results to Invensys. Only actuators that fail...

CPSC Ongoing

CPSC, Invensys Building Systems Announce Recall of Siebe Actuators in Building Fire/Smoke Dampers

Recalled: October 2, 2002 ~Up to 560,000 units affected 03003

Description

These MA-200 and MA-200-1 series actuators were used in fire and smoke dampers that were manufactured by various companies from December 1993 through October 1999, which were installed by private contractors in commercial and residential buildings. The actuators have manufacture date codes of 9348 through 9947. See the associated recall alert for more details on the dampers and companies involved.

Injuries / Consequence

Building owners, damper manufacturers, and fire and safety investigators have reported dampers not closing during testing.

Remedy

To be eligible for a free actuator replacement, the building owner must test the actuator and report the results to Invensys. Only actuators that fail testing will be replaced.

Products Affected

Siebe actuators

Dampers

Related Recalls

Frequently Asked Questions

Is this recall still active?

Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.

How do I check if my product is affected?

Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.

What remedy is available for this recall?

The listed remedy for this recall is: To be eligible for a free actuator replacement, the building owner must test the actuator and report the results to Invensys. Only actuators that fail testing will be replaced.

Where can I find the original recall notice?

This recall was issued by CPSC. You can view the original notice using the link provided above.

Data sourced from Consumer Product Safety Commission. Recall information may not reflect the most current status. RecallDex is not affiliated with any US government agency. Contact the manufacturer or relevant agency for the latest information.