Key Takeaway
Kidde Recalls Dual Sensor Smoke Alarms Due to Risk of Failure to Alert Consumers to a Fire by Fyrnetics Limited, of Hong Kong was recalled on March 21, 2018. What to do: Consumers should remove the alarm from the wall/ceiling and visually inspect it through the opening on the side of the alarm for the presence of a yel...
Kidde Recalls Dual Sensor Smoke Alarms Due to Risk of Failure to Alert Consumers to a Fire
Description
This recall involves models PI2010 and PI9010 of Kidde dual sensor (photoelectric and ionization) smoke alarms. "KIDDE" is printed on the front center of the smoke alarm. The model number and date code are printed on the back of the alarm. Model Date Code PI9010 (DC/battery powered) 2016 Sep. 10 through 2017 Oct. 13 PI2010 (AC/hardwired) 2016 Sep. 10 through 2017 Oct. 13
Injuries / Consequence
The firm has received one report of the yellow protective cap being present on a smoke alarm before it was installed in a consumer's home. No reports of incidents or injuries as a result of a yellow cap being present have been reported.
Remedy
Consumers should remove the alarm from the wall/ceiling and visually inspect it through the opening on the side of the alarm for the presence of a yellow cap. Consumers should not attempt to take apart the alarm, open the casing, or otherwise remove the yellow cap themselves. If a yellow cap is present, the consumer should immediately contact Kidde to receive instructions and request a free replacement smoke alarm. They should remove and discard the recalled smoke alarm only after they receive and install the replacement alarm. If no yellow cap is present, consumers should reinstall the smoke alarm and no further action is needed.
Products Affected
Kidde dual-sensor (photoelectric and ionization) smoke alarms - models PI2010 and PI9010
Images
Company Information
Fyrnetics Limited, of Hong Kong
Unknown location
View all 1 recalls by Fyrnetics Limited, of Hong Kong →Frequently Asked Questions
Is this recall still active?
Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.
How do I check if my product is affected?
Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.
What remedy is available for this recall?
The listed remedy for this recall is: Consumers should remove the alarm from the wall/ceiling and visually inspect it through the opening on the side of the alarm for the presence of a yellow cap. Consumers should not attempt to take apar...
Where can I find the original recall notice?
This recall was issued by CPSC. You can view the original notice using the link provided above.