Key Takeaway
Lamps Warned by Woods Wire Products by Woods Wire Products was recalled on December 12, 1975.
Lamps Warned by Woods Wire Products
Description
Lamps Warned by Woods Wire Products NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 12, 1975 Release # 75-072 CPSC And Woods Wire Products, Inc. Warn Of Severe Shock Hazard WASHINGTON, D.C. -- The U.S. Consumer Product Safety Commission and Woods Wire Products, Inc. today announced that some 40,000 clamp-on lamps with metal reflectors, manufactured during 1970 and 1971 by Woods Wire Products, Inc. may pose an imminent danger of severe electric shock. When the lamp is plugged in, the metal spring protecting the cord from strain at the base of the bulb socket cap may become electrically "hot," thus creating a shock hazard. Most of the lamps were sold in retail stores between April 1970 and December 1971 for approximately $3.00. Some may still be available. Retailers are being notified. The lamp consists of a bulb socket attached to a bowl-shaped metal reflector and to a clamp capable of gripping the edge of a door, table top, or other item of furniture. Such lamps are used for a variety of purposes requiring extra illumination. Consumers can determine whether theirs is one of the potentially defective lamps by DISCONNECTING THE LAMP from the electrical outlet and examining it as follows: The lamp will have a metal spring at the base of the socket, surrounding the power cord and extending into the base of the bulb socket cap. The wire usually has a black vinyl covering, with the trademark "INDUSTRO R" and "300 Volts" printed in white letters. These two characteristics will identify the lamp, but consumers should be aware that the metal spring is the primary identifier. After DISCONNECTING and identifying the lamp, consumers should separate the socket cap from the assembly and examine the inside of the socket. If there is a cardboard disc between the spring and the socket assembly, the lamp does not present the potential hazard. However, if there is no such insulator disc, the consumer should call the manufacturer Woods Wire Products, Inc. toll free at 800/428-9511 (In Indiana call collect at 317/844-7262) to receive instructions on how to return the potentially defective socket assembly to the manufacturer. All postage will be paid by the manufacturer.
Products Affected
Industro R clamp-on lamps with metal reflectors
LampsCompany Information
Woods Wire Products
Unknown location
View all 2 recalls by Woods Wire Products →Related Recalls
Frequently Asked Questions
Is this recall still active?
Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.
How do I check if my product is affected?
Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.
What remedy is available for this recall?
Check the remedy section above or contact the manufacturer directly for current remedy options.
Where can I find the original recall notice?
This recall was issued by CPSC. You can view the original notice using the link provided above.