Key Takeaway
Mirka Extends Recall of Compact Electric Random Orbital Sanders Due to Fire Hazard was recalled on January 27, 2015. What to do: Customers should immediately stop using the recalled sanders, unplug them and contact Mirka Abrasives for a free replacement.
Mirka Extends Recall of Compact Electric Random Orbital Sanders Due to Fire Hazard
Description
This recall involves 5-inch and 6-inch Mirka CEROS compact electric random orbital sanders. The sanders are yellow and black with Mirka logo on the front. A speed control lever is on the top of the sanders and a vacuum hose connector on the rear. The recalled sanders came with either a cardboard box or a plastic carrying case, a 12-foot power cord, a wrench, a multi-hole backup pad and assorted abrasives. Some also came with a DC transformer. The 5-inch sander is model CEROS550. The 6-inch sander is model CEROS650. Model information is on a white sticker on the back of the sander housing beneath the hand grip. Serial numbers are engraved on the side of the sander housing just above the dust shroud. Sanders with serial numbers in the following ranges are being recalled: Model Serial Number Range CEROS550 345231326001 to 345231326023 345331326001 to 345331326025 401528672001 to 401528672080 402228672001 to 402228672016 CEROS650 401428673001 to 401428673070 401528673001 to 401528673026 Also being recalled in the U.S. only: Sander models CEROS550, CEROS650, and 6-inch sander model CEROS680 that were sent to the Mirka Authorized Repair Center between February 24, 2014 and December 16, 2014 to receive a new speed controller. Mirka is directly contacting U.S. consumers with sanders that were sent to the repair center and have serial numbers in the following ranges: Model Serial Number Range CEROS550 241328672025 to 417528672091 CNM25465 to VUU35621 CEROS650 334328673009 to 401428673070 CNM25731 to VVU66448 CEROS680 CLA47198 to VLA38835 The serial numbers are engraved on the side of the sander housing just above the dust shroud or on a white label on the back of the sander housing beneath the grip.
Injuries / Consequence
Mirka Abrasives has received five reports of electrical shorting incidents which included the sanders sparking and smoking. No injuries or property damage have been reported.
Remedy
Customers should immediately stop using the recalled sanders, unplug them and contact Mirka Abrasives for a free replacement.
Products Affected
Random orbital sanders
Power SandersImages
Related Recalls
Frequently Asked Questions
Is this recall still active?
Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.
How do I check if my product is affected?
Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.
What remedy is available for this recall?
The listed remedy for this recall is: Customers should immediately stop using the recalled sanders, unplug them and contact Mirka Abrasives for a free replacement.
Where can I find the original recall notice?
This recall was issued by CPSC. You can view the original notice using the link provided above.