Key Takeaway
Plastic Table Lamps Warning by B & D Molded Products was recalled on December 3, 1981.
Plastic Table Lamps Warning
Description
Plastic Table Lamps Warning NEWS from CPSC U.S. Consumer Product Safety Commission Office of Information and Public Affairs Washington, DC 20207 FOR IMMEDIATE RELEASE December 3, 1981 Release # 81-029 Consumers Warned That Four Million Plastic Lamps May Pose Electrocution Hazard WASHINGTON, D.C. ( Dec. 3 ) -- Three firms today alerted consumers that approximately four million plastic table lamps if misused or carelessly handled may pose a risk of eIectrocution or electrical shock. The warning was issued voluntarily in cooperation with the U.S. Consumer Product Safety Commission by A-Bee Syndicate, Inc., of New York, New York; B & D Molded Products, Inc., of Shelton, Connecticut; and Injection Corporation, of Plainfield, New Jersey. CPSC staff has identified these companies as manufacturers and distributors of the lamps according to definitions in the Consumer Product Safety Act. According to the firms, the lamps were designed and manufactured in conformity with existing industry practices. They could, however, pose a potential safety hazard if the lightbulb socket is dislodged or removed from the lamp base, thereby exposing two electrical terminals positioned on either side of the socket. The lamps consist of a black plastic base with three legs which supports a plastic shade covered with bubble-like protrusions. The shades were produced in three colors: white, lime-green and neon-orange. The lamps stand approximately 16 inches tall, and some were made with the name "A-Bee" on the smooth collar at the base of the shade. The lamps were sold nationwide for approximately $1 each in variety retail stores from 1965 through 1975, although the majority were distributed in the eastern half of the U.S. Some lamps may have been given away as promotional items. Consumers who own one of the lamps should take the following steps to determine if there is a safety hazard: Unplug the lamp; Remove the shade and turn the lamp upside down; Throw the lamp away if the bulb socket falls out of the base or is loose enough to expose the electrical terminals. Anyone requiring additional information about this warning should contact CPSC's toll-free Hotline at 800-638-2772. Warning Certain of the pictured table lamps may contain a potential electrocution or shock hazard. Each lamp consists of a black, plastic three-legged base supporting a plastic shade covered with bubble-like protrusions. The shades are available in white, neon-orange, and lime-green. The lamps were distributed from 1965 through April 1975 and sold for approximately $1.00. The lamps may often be identified through the name "A-BEE" which may be visible on the smooth collar on the base of the lamp's shade. If the lamp is titled or tipped, the bulb socket may dislodge from the lamp's base, thereby exposing two copper electrical terminals. Consumers should check to see if their lamp is one affected by talking the following steps: Unplug the Lamp Remove the shade from the lamp's base Turn the lamp upside down If a bulb socket works itself loose or falls out exposing the electrical terminals, the lamp should not be used. In certain of the affected table lamps, the bulb socket may not be securely fastened to the lamp's base or may have been able to work itself loose from the lamp's base. Consumers owning one of the affected lamps are warned to immediately stop use of the lamp and remove it form children's access.
Products Affected
A-Bee lamps
LampsCompany Information
B & D Molded Products
Unknown location
View all 1 recalls by B & D Molded Products →Related Recalls
IKEA Reannounces and Expands Recall of Children's Wall-Mounted Lamps Due to Strangulation Hazard
April 29, 2014
IKEA Recalls Children's Wall-Mounted Lamps Due to Strangulation Hazard; One Child Death Reported
December 11, 2013
Crate and Barrel Recalls Finley Hanging Pendant Lamps Due to Fire and Shock Hazards
October 24, 2013
Target Recalls Threshold Floor Lamps Due to Fire and Shock Hazard
September 3, 2013
Innovage LLC Recalls Discovery Kids Lamps Due to Fire and Burn Hazards
February 9, 2010
Lamps Recalled by LTD Commodities LLC, ABC Distributing and the Lakeside Collection Due to Fire Hazard
July 1, 2009
Frequently Asked Questions
Is this recall still active?
Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.
How do I check if my product is affected?
Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.
What remedy is available for this recall?
Check the remedy section above or contact the manufacturer directly for current remedy options.
Where can I find the original recall notice?
This recall was issued by CPSC. You can view the original notice using the link provided above.