Key Takeaway
SPARTAN/STEERING:LINKAGES:LINK by SPARTAN MOTORS, INC. was recalled on May 22, 1996. What to do: DEALERS WILL REPLACE WASHERS WITH 90 DEGREE FLANGES WITH WASHERS HAVING A 45 DEGREE FLANGE AND SANDWICH THE RUBBER BUSHING IN THE ANTI-TILT SEAL. THE...
SPARTAN/STEERING:LINKAGES:LINK
Description
THE DRAGLINKS HAVE BEEN EQUIPPED WITH AN ANTI-TILT SEAL ON THE PITMAN END THAT CAN AFFECT THE TAPER FIT OF THE BALL STUD TAPER INTO THE PITMAN ARM. THE RECOMMENDED TORQUE ON THE STUD NUT DOES NOT OVERCOME THE COMPRESSION OF THE ANTI-TILT SEAL.
Injuries / Consequence
THIS CONDITION CAN CAUSE A LOOSENING OF THE JOINT AND ULTIMATE SEPARATION RESULTING IN LOSS OF STEERING.
Remedy
DEALERS WILL REPLACE WASHERS WITH 90 DEGREE FLANGES WITH WASHERS HAVING A 45 DEGREE FLANGE AND SANDWICH THE RUBBER BUSHING IN THE ANTI-TILT SEAL. THE FLANGES ALLOW THE BUSHING TO PROPERLY EXPAND. IF A BODY HAS BEEN COMPLETED ON THE CHASSIS, THE PITMAN ARM WILL ALSO BE REPLACED.
Products Affected
Vehicle
VehiclesCompany Information
SPARTAN MOTORS, INC.
Unknown location
View all 80 recalls by SPARTAN MOTORS, INC. →Related Recalls
License Plate Lamp Incorrectly Installed/FMVSS 108
April 16, 2020
Valve Stems may Rub on Brake Caliper
July 15, 2015
Engine Cooling Fan May Crack
June 24, 2015
Rear Stay Rod Fasteners may Loosen
June 19, 2015
Driveshaft may Disconnect
April 28, 2015
Images From Rear Camera are Reversed
April 27, 2015
Frequently Asked Questions
Is this recall still active?
Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.
How do I check if my product is affected?
Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.
What remedy is available for this recall?
The listed remedy for this recall is: DEALERS WILL REPLACE WASHERS WITH 90 DEGREE FLANGES WITH WASHERS HAVING A 45 DEGREE FLANGE AND SANDWICH THE RUBBER BUSHING IN THE ANTI-TILT SEAL. THE FLANGES ALLOW THE BUSHING TO PROPERLY EXPAND. IF A...
Where can I find the original recall notice?
This recall was issued by NHTSA. You can view the original notice using the link provided above.