Key Takeaway

STEERING:GEAR:RACK AND PINION by WINNEBAGO IND., INC. was recalled on September 25, 1991. What to do: REPLACE THE PINCH BOLTS IN THE INTERMEDIATE STEERING SHAFT ASSEMBLY WITH 7/16" BOLTS. TORQUE BOLTS 63 TO 75 FOOT POUNDS.

NHTSA Ongoing

STEERING:GEAR:RACK AND PINION

Recalled: September 25, 1991 ~160 units affected 91V152

Description

THE STEERING GEAR INTERMEDIATE SHAFT CLAMPS USED TO RETAIN THE INTERMEDIATE SHAFT TO THE STEERING GEAR SHAFT AND THE COLUMN SHAFT CAN BECOME LOOSE BECAUSE OF INCORRECT BOLT SIZE AND CLAMP FORCE.

Injuries / Consequence

LOOSE INTERMEDIATE SHAFT CLAMPS COULD WEAR SMOOTH THERESPECTIVE SPLINES OF EACH CONNECTING PART AND CAUSE THE ASSEMBLY TO FALL APART.THIS RESULTS IN LOSS OF STEERING CONTROL AND A POSSIBLE VEHICLE ACCIDENT.

Remedy

REPLACE THE PINCH BOLTS IN THE INTERMEDIATE STEERING SHAFT ASSEMBLY WITH 7/16" BOLTS. TORQUE BOLTS 63 TO 75 FOOT POUNDS.

Products Affected

Vehicle

Vehicles

Company Information

WINNEBAGO IND., INC.

Unknown location

View all 35 recalls by WINNEBAGO IND., INC. →
View original recall at NHTSA →

Related Recalls

NHTSA

SUSPENSION:INDEPENDENT FRONT

April 8, 1993
NHTSA

LIGHTING AND COMMUNICATIONS SYSTEMS

November 27, 1992
NHTSA

EXHAUST SYSTEM

October 30, 1992
NHTSA

EQUIPMENT:OTHER PIECES

August 3, 1992
NHTSA

STRUCTURE:BODY:WHEEL WELL

July 17, 1992
NHTSA

EQUIPMENT:OTHER PIECES:AUXILLIARY GENERATOR

March 23, 1992

Frequently Asked Questions

Is this recall still active?

Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.

How do I check if my product is affected?

Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.

What remedy is available for this recall?

The listed remedy for this recall is: REPLACE THE PINCH BOLTS IN THE INTERMEDIATE STEERING SHAFT ASSEMBLY WITH 7/16" BOLTS. TORQUE BOLTS 63 TO 75 FOOT POUNDS.

Where can I find the original recall notice?

This recall was issued by NHTSA. You can view the original notice using the link provided above.

Data sourced from National Highway Traffic Safety Administration. Recall information may not reflect the most current status. RecallDex is not affiliated with any US government agency. Contact the manufacturer or relevant agency for the latest information.