Key Takeaway
STEERING:GEAR:RACK AND PINION by OSHKOSH TRUCK CORPORATION was recalled on February 22, 1995. What to do: DEALERS WILL REPLACE ALL METRIC GRADE 8.8 BOLTS WITH THE CORRECT METRIC GRADE 10.9 BOLTS, LOCTITE WILL BE INSTALLED INTO THE BOLT HOLE, AND THE BOLTS...
STEERING:GEAR:RACK AND PINION
Description
METRIC GRADE 8.8 BOLTS WERE MIXED IN INVENTORY WITH METRIC GRADE 10.9 BOLTS. INCORRECT GRADE BOLTS (8.8) WERE USED IN ATTACHING THE 710 SAGINAW STEERING GEAR TO THE FRAME.
Injuries / Consequence
THE USE OF INCORRECT BOLTS CAN CAUSE THE STEERING GEAR TO SEPARATE FROM THE FRAME CAUSING A LOSS OF STEERING CONTROL, INCREASING THE POTENTIAL FOR A VEHICLE ACCIDENT.
Remedy
DEALERS WILL REPLACE ALL METRIC GRADE 8.8 BOLTS WITH THE CORRECT METRIC GRADE 10.9 BOLTS, LOCTITE WILL BE INSTALLED INTO THE BOLT HOLE, AND THE BOLTS WILL BE TORQUED TO SPECIFICATION.
Products Affected
Vehicle
VehiclesCompany Information
OSHKOSH TRUCK CORPORATION
Unknown location
View all 61 recalls by OSHKOSH TRUCK CORPORATION →Related Recalls
QUICK RELEASE VALVES/HALDEX/MERITOR WABCO
May 4, 2009
VARIABLE VALVE ACTUATION OIL LINE/OIL LEAK
July 31, 2007
SR-7 SPRING BRAKE MODULATING VALVE/BENDIX
July 25, 2007
TRUCK BRIDGE AXLES/HENDRICKSON
July 2, 2007
TORQUE ROD TOWER/ARVINMERITOR
October 12, 2006
SPRING BRAKE MODULATING VALVES/BENDIX
June 19, 2006
Frequently Asked Questions
Is this recall still active?
Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.
How do I check if my product is affected?
Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.
What remedy is available for this recall?
The listed remedy for this recall is: DEALERS WILL REPLACE ALL METRIC GRADE 8.8 BOLTS WITH THE CORRECT METRIC GRADE 10.9 BOLTS, LOCTITE WILL BE INSTALLED INTO THE BOLT HOLE, AND THE BOLTS WILL BE TORQUED TO SPECIFICATION.
Where can I find the original recall notice?
This recall was issued by NHTSA. You can view the original notice using the link provided above.