Key Takeaway

STEERING:YOKE (MOTORCYCLE) by OHLIN RACING AB was recalled on May 20, 1994. What to do: THE ONE-WAY VALVE WILL BE REPLACED.

NHTSA Ongoing

STEERING:YOKE (MOTORCYCLE)

Recalled: May 20, 1994 ~491 units affected 94E014

Description

THE ONE-WAY VALVE IN THE STEERING DAMPERS IS USED TO CONTROL THE HYDRAULIC OIL FLOW SO THAT THE OIL VOLUME INSIDE THE STEERING DAMPER EXPANDS WITH TEMPERATURE. THE VALVE SEAT CAN BECOME DEFORMED DURING USE, CAUSING UNCONTROLLED RESTRICTION OF THE OIL FLOW. THE DEFORMED VALVE CAUSES THE INTERNAL PRESSURE ON THE DAMPER OILS SEALS TO INCREASE FROM INCREASED OIL TEMPERATURE AND VOLUME EXPANSION.

Injuries / Consequence

THE DEFORMED VALVE SEAT CAUSES INCREASED FRICTION FORCECAUSING VERY HARD DAMPING, AND COULD, IN A SEVERE CASE, CAUSE LOSS OF STEERINGCONTROL AND AN ACCIDENT.

Remedy

THE ONE-WAY VALVE WILL BE REPLACED.

Products Affected

Vehicle

Vehicles

Company Information

OHLIN RACING AB

Unknown location

View all 1 recalls by OHLIN RACING AB →

Related Recalls

Frequently Asked Questions

Is this recall still active?

Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.

How do I check if my product is affected?

Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.

What remedy is available for this recall?

The listed remedy for this recall is: THE ONE-WAY VALVE WILL BE REPLACED.

Where can I find the original recall notice?

This recall was issued by NHTSA. You can view the original notice using the link provided above.

Data sourced from National Highway Traffic Safety Administration. Recall information may not reflect the most current status. RecallDex is not affiliated with any US government agency. Contact the manufacturer or relevant agency for the latest information.