Key Takeaway

STEERING:COLUMN by DOUGLAS AUTOTECH CORP. was recalled on December 1, 1993. What to do: A VISUAL INSPECTION WILL BE MADE TO SEE IF THE ROLL PIN IS MISSING. IF THE PIN IS MISSING, THE ENTIRE COLUMN WILL BE REMOVED AND A NEW PRODUCTION COLU...

NHTSA Ongoing

STEERING:COLUMN

Recalled: December 1, 1993 ~11,687 units affected 93E037

Description

THE U-JOINT IN THE STEERING COLUMN IS COUPLED TO THE UPPER STEERING SHAFT WITH A PRESS-FIT BETWEEN THE U-JOINT AND THE UPPER STEERING SHAFT. A CROSS HOLE IS THEN DRILLED THROUGH BOTH COMPONENTS AND A ROLL PIN IS DRIVEN THROUGH THE HOLE TO PROVIDE A BACKUP RETENTION MECHANISM. THIS ROLL PIN WAS NOT INSTALLED ON THE ASSEMBLIES.

Injuries / Consequence

THE PRESS-FIT BETWEEN THE STEERING COLUMN U-JOINT AND THEUPPER STEERING SHAFT MAY NOT BE SUFFICIENT TO RETAIN THE SHAFT IN THE U-JOINT.THE U-JOINT AND SHAFT MAY BECOME DISENGAGED, CAUSING COMPLETE LOSS OF STEERINGWHICH COULD RESULT IN AN ACCIDENT.

Remedy

A VISUAL INSPECTION WILL BE MADE TO SEE IF THE ROLL PIN IS MISSING. IF THE PIN IS MISSING, THE ENTIRE COLUMN WILL BE REMOVED AND A NEW PRODUCTION COLUMN WILL BE INSTALLED.

Products Affected

Vehicle

Vehicles

Company Information

DOUGLAS AUTOTECH CORP.

Unknown location

View all 3 recalls by DOUGLAS AUTOTECH CORP. →
View original recall at NHTSA →

Related Recalls

NHTSA

STEERING ANGLE SENSOR FAILURE

June 19, 2009
NHTSA

STEERING:COLUMN

December 1, 1993

Frequently Asked Questions

Is this recall still active?

Check the status badge at the top of this page. "Ongoing" means the recall is still active and you should follow the remedy instructions. "Completed" or "Terminated" means the recall process has concluded, though the safety issue remains relevant for any unrepaired products.

How do I check if my product is affected?

Compare the model number, lot code, serial number, or date range listed in the recall notice with the information on your product's label or packaging. For vehicles, check your VIN at NHTSA.gov/Recalls.

What remedy is available for this recall?

The listed remedy for this recall is: A VISUAL INSPECTION WILL BE MADE TO SEE IF THE ROLL PIN IS MISSING. IF THE PIN IS MISSING, THE ENTIRE COLUMN WILL BE REMOVED AND A NEW PRODUCTION COLUMN WILL BE INSTALLED.

Where can I find the original recall notice?

This recall was issued by NHTSA. You can view the original notice using the link provided above.

Data sourced from National Highway Traffic Safety Administration. Recall information may not reflect the most current status. RecallDex is not affiliated with any US government agency. Contact the manufacturer or relevant agency for the latest information.